5.7. ASAP7 Tutorial
vlsi folder of this repository contains an example Hammer flow with the SHA-3 accelerator and a dummy hard macro. This example tutorial uses the built-in ASAP7 technology plugin and requires access to the included Mentor tool plugin submodule, which is needed for DRC & LVS.
5.7.1. Project Structure
This example gives a suggested file structure and build system. The
vlsi/ folder will eventually contain the following files and folders:
Integration of Hammer’s build system into Chipyard and abstracts away some Hammer commands.
Hammer output directory. Can be changed with the
Will contain subdirectories such as
inputs.ymldenoting the top module and input Verilog files.
A template file for tool environment configuration. Fill in the install and license server paths for your environment. For SLICE and BWRC affiliates, example environment configs are found here.
Entry point to Hammer. Contains example placeholders for hooks.
Hammer IR for this tutorial. For SLICE and BWRC affiliates, an example ASAP7 config is found here.
Hammer IR not used for this tutorial but provided as templates.
All of the elaborated Chisel and FIRRTL.
Tool plugin repositories.
A convenience script to view a layout using gdstk or gdspy. Only use this for small layouts (i.e. smaller than the TinyRocketConfig example) since the gdstk-produced SVG will be too big and gdspy’s GUI is very slow for large layouts!
Genus, Innovus, Voltus, VCS, and Calibre licenses
For ASAP7 specifically (README for more details):
First, download the ASAP7 v1p7 PDK (we recommend shallow-cloning or downloading an archive of the repository). Then, download the encrypted Calibre decks tarball tarball to a directory of choice (e.g. the root directory of the PDK) but do not extract it like the instructions say. The tech plugin is configured to extract the tarball into a cache directory for you.
If you have additional ASAP7 hard macros, their LEF & GDS need to be 4x upscaled @ 4000 DBU precision.
5.7.3. Initial Setup
In the Chipyard root, ensure that you have the Chipyard conda environment activated. Then, run:
to pull and install the plugin submodules. Note that for technologies other than
asap7, the tech submodule must be added in the
vlsi folder first.
5.7.4. Building the Design
To elaborate the
TinyRocketConfig and set up all prerequisites for the build system to push the design and SRAM macros through the flow:
make buildfile CONFIG=TinyRocketConfig
CONFIG=TinyRocketConfig selects the target generator config in the same manner as the rest of the Chipyard framework. This elaborates a stripped-down Rocket Chip in the interest of minimizing tool runtime.
For the curious,
make buildfile generates a set of Make targets in
build/hammer.d. It needs to be re-run if environment variables are changed. It is recommended that you edit these variables directly in the Makefile rather than exporting them to your shell environment.
5.7.5. Running the VLSI Flow
This is the entry script with placeholders for hooks. In the
ExampleDriver class, a list of hooks is passed in the
get_extra_par_hooks. Hooks are additional snippets of python and TCL (via
x.append()) to extend the Hammer APIs. Hooks can be inserted using the
make_pre/post/replacement_hook methods as shown in this example. Refer to the Hammer documentation on hooks for a detailed description of how these are injected into the VLSI flow.
This contains the Hammer configuration for this example project. Example clock constraints, power straps definitions, placement constraints, and pin constraints are given. Additional configuration for the extra libraries and tools are at the bottom.
technology.asap7.tarball_dir to the absolute path to the directory where the downloaded the ASAP7 Calibre deck tarball lives. If it is not in the PDK’s root directory, then also set
make syn CONFIG=TinyRocketConfig
Post-synthesis logs and collateral are in
build/syn-rundir. The raw quality of results data is available at
build/syn-rundir/reports, and methods to extract this information for design space exploration are a work in progress.
make par CONFIG=TinyRocketConfig
After completion, the final database can be opened in an interactive Innovus session via
Intermediate database are written in
build/par-rundir between each step of the
par action, and can be restored in an interactive Innovus session as desired for debugging purposes.
Timing reports are found in
build/par-rundir/timingReports. They are gzipped text files.
gdspy can be used to view the final layout, but it is somewhat crude and slow (wait a few minutes for it to load):
By default, this script only shows the M2 thru M4 routing. Layers can be toggled in the layout viewer’s side pane and
view_gds.py has a mapping of layer numbers to layer names.
184.108.40.206. DRC & LVS
To run DRC & LVS, and view the results in Calibre:
make drc CONFIG=TinyRocketConfig
make lvs CONFIG=TinyRocketConfig
Some DRC errors are expected from this PDK, as explained in the ASAP7 plugin readme. Furthermore, the dummy SRAMs that are provided in this tutorial and PDK do not have any geometry inside, so will certainly cause DRC errors.
Simulation with VCS is supported, and can be run at the RTL- or gate-level (post-synthesis and post-P&R). The simulation infrastructure as included here is intended for running RISC-V binaries on a Chipyard config. For example, for an RTL-level simulation:
make sim-rtl CONFIG=TinyRocketConfig BINARY=$RISCV/riscv64-unknown-elf/share/riscv-tests/isa/rv32ui-p-simple
Post-synthesis and post-P&R simulations use the
sim-par make targets, respectively.
-debug-timing to these make targets will instruct VCS to write a SAIF + FSDB (or VPD if the
USE_VPD flag is set) and do timing-annotated simulations, respectively. See the
sim.mk file for all available targets.
220.127.116.11. Power/Rail Analysis
Post-P&R power and rail (IR drop) analysis is supported with Voltus:
make power-par CONFIG=TinyRocketConfig
If you append the
BINARY variable to the command, it will use the activity file generated from a
sim-<syn/par>-debug run and report dynamic power & IR drop from the toggles encoded in the waveform.
To bypass gate-level simulation, you will need to run the power tool manually (see the generated commands in the generated
hammer.d buildfile). Static and active (vectorless) power & IR drop will be reported.