5.9. Sky130 + OpenROAD Tutorial

The vlsi folder of this repository contains an example Hammer flow with the TinyRocketConfig from Chipyard. This example tutorial uses the built-in Sky130 technology plugin and OpenROAD tool plugin.

5.9.1. Project Structure

This example gives a suggested file structure and build system. The vlsi/ folder will eventually contain the following files and folders:

  • Makefile, sim.mk, power.mk

    • Integration of Hammer’s build system into Chipyard and abstracts away some Hammer commands.

  • build

    • Hammer output directory. Can be changed with the OBJ_DIR variable.

    • Will contain subdirectories such as syn-rundir and par-rundir and the inputs.yml denoting the top module and input Verilog files.

  • env.yml

    • This file is not used in this tutorial, but is required for the commercial tool flow. A template file for tool environment configuration. Fill in the install and license server paths for your environment. For SLICE and BWRC affiliates, example environment configs are found here.

  • example-vlsi-sky130

    • Entry point to Hammer. Contains example placeholders for hooks.

  • example-sky130.yml, example-openroad.yml, example-designs/sky130-openroad.yml

    • Hammer IR for this tutorial. For SLICE and BWRC affiliates, an example Sky130 config is found here.

  • example-design.yml, example-asap7.yml, example-tech.yml

    • Hammer IR not used for this tutorial but provided as templates.

  • generated-src

    • All of the elaborated Chisel and FIRRTL.

  • hammer-<vendor>-plugins

    • Tool plugin repositories not used for this tutorial (they are provided in the hammer-vlsi package).

5.9.2. Prerequisites

5.9.2.1. Quick Prerequisite Setup

As of recently, most of the prerequisites of this tutorial may now be installed as conda packages. The prerequisite setup for this tutorial may eventually be scripted, but for now the directions to set them up are below. Note that we create a new conda environment for each tool because some of them have conflicting dependencies.

# channel settings so openroad/klayout install properly
conda config --set channel_priority true
conda config --add channels defaults

# download all files for Sky130A PDK
conda create -c litex-hub --prefix ~/.conda-sky130 open_pdks.sky130a=1.0.457_0_g32e8f23
# clone the SRAM22 Sky130 SRAM macros
git clone https://github.com/rahulk29/sram22_sky130_macros ~/sram22_sky130_macros

# install all VLSI tools
conda create -c litex-hub --prefix ~/.conda-yosys yosys=0.27_4_gb58664d44
conda create -c litex-hub --prefix ~/.conda-openroad openroad=2.0_7070_g0264023b6
conda create -c litex-hub --prefix ~/.conda-klayout klayout=0.28.5_98_g87e2def28
conda create -c litex-hub --prefix ~/.conda-signoff magic=8.3.376_0_g5e5879c netgen=1.5.250_0_g178b172

# revert conda settings
conda config --set channel_priority strict
conda config --remove channels defaults

5.9.3. Initial Setup

In the Chipyard root, ensure that you have the Chipyard conda environment activated. Then, run:

./scripts/init-vlsi.sh sky130 openroad

to pull and install the plugin submodules. Note that for technologies other than sky130 or asap7, the tech submodule is cloned in the vlsi folder, and for the commercial tool flow (set up by omitting the openroad argument), the tool plugin submodules are cloned into the vlsi folder.

Now navigate to the vlsi directory. The remainder of the tutorial will assume you are in this directory. We will summarize a few files in this directory that will be important for the rest of the tutorial.

cd ~chipyard/vlsi

5.9.3.1. example-vlsi-sky130

This is the entry script with placeholders for hooks. In the ExampleDriver class, a list of hooks is passed in the get_extra_par_hooks. Hooks are additional snippets of python and TCL (via x.append()) to extend the Hammer APIs. Hooks can be inserted using the make_pre/post/replacement_hook methods as shown in this example. Refer to the Hammer documentation on hooks for a detailed description of how these are injected into the VLSI flow.

5.9.3.2. example-sky130.yml

This contains the Hammer configuration for this example project. Example clock constraints, power straps definitions, placement constraints, and pin constraints are given. Additional configuration for the extra libraries and tools are at the bottom.

Add the following YAML keys to the top of this file to specify the location of the Sky130A PDK and SRAM macros.

# all ~ should be replaced with absolute paths to these directories
# technology paths
technology.sky130.sky130A: ~/.conda-sky130/share/pdk/sky130A
technology.sky130.sram22_sky130_macros: ~/sram22_sky130_macros

5.9.3.3. example-openroad.yml

This contains the Hammer configuration for the OpenROAD tool flow. It selects tools for synthesis (Yosys), place and route (OpenROAD), DRC (KLayout or Magic), and LVS (NetGen).

Add the following YAML keys to the top of this file to specify the locations of the tool binaries. Note that this is not required if the tools are already on your PATH.

# all ~ should be replaced with absolute paths to these directories
# tool binary paths
synthesis.yosys.yosys_bin: ~/.conda-yosys/bin/yosys
par.openroad.openroad_bin: ~/.conda-openroad/bin/openroad
par.openroad.klayout_bin: ~/.conda-klayout/bin/klayout  # binary that OpenROAD calls for final GDS writeout
drc.klayout.klayout_bin: ~/.conda-klayout/bin/klayout   # binary that runs for DRC step
drc.magic.magic_bin: ~/.conda-signoff/bin/magic
lvs.netgen.netgen_bin: ~/.conda-signoff/bin/netgen

5.9.4. Building the Design

To elaborate the TinyRocketConfig and set up all prerequisites for the build system to push the design and SRAM macros through the flow:

make buildfile tutorial=sky130-openroad

The command make buildfile generates a set of Make targets in build/hammer.d. It needs to be re-run if environment variables are changed. It is recommended that you edit these variables directly in the Makefile rather than exporting them to your shell environment.

The buildfile make target has dependencies on both (1) the Verilog that is elaborated from all Chisel sources and (2) the mapping of memory instances in the design to SRAM macros; all files related to these two steps reside in the generated-src/chipyard.harness.TestHarness.TinyRocketConfig-ChipTop directory. Note that the files in generated-src vary for each tool/technology flow. This especially applies to the Sky130 Commercial vs OpenROAD tutorial flows, so these flows should be run in separate chipyard installations. If the wrong sources are generated, simply run make buildfile -B to rebuild all targets correctly.

For the sake of brevity, in this tutorial we will set the Make variable tutorial=sky130-openroad, which will cause additional variables to be set in tutorial.mk, a few of which are summarized as follows:

  • CONFIG=TinyRocketConfig selects the target generator config in the same manner as the rest of the Chipyard framework. This elaborates a stripped-down Rocket Chip in the interest of minimizing tool runtime.

  • tech_name=sky130 sets a few more necessary paths in the Makefile, such as the appropriate Hammer plugin

  • TOOLS_CONF and TECH_CONF select the approproate YAML configuration files, example-openroad.yml and example-sky130.yml, which are described above

  • DESIGN_CONF and EXTRA_CONFS allow for additonal design-specific overrides of the Hammer IR in example-sky130.yml

  • VLSI_OBJ_DIR=build-sky130-openroad gives the build directory a unique name to allow running multiple flows in the same repo. Note that for the rest of the tutorial we will still refer to this directory in file paths as build, again for brevity.

  • VLSI_TOP is by default ChipTop, which is the name of the top-level Verilog module generated in the Chipyard SoC configs. By instead setting VLSI_TOP=Rocket, we can use the Rocket core as the top-level module for the VLSI flow, which consists only of a single RISC-V core (and no caches, peripherals, buses, etc). This is useful to run through this tutorial quickly, and does not rely on any SRAMs.

5.9.5. Running the VLSI Flow

5.9.5.1. Synthesis

make syn tutorial=sky130-openroad

Post-synthesis logs and collateral are in build/syn-rundir.

5.9.5.2. Place-and-Route

make par tutorial=sky130-openroad

Note that sometimes OpenROAD freezes on commands following the detailed_route step, so for now we recomment running place-and-route until the extraction step, then re-starting the flow at this step. See the VLSI Flow Control documentation below for how to break up the flow into these steps.

After completion, the final database can be opened in an interactive OpenROAD session. Hammer generates a convenient script to launch these sessions

cd ./build/chipyard.harness.TestHarness.TinyRocketConfig-ChipTop/par-rundir
./generated-scripts/open_chip

Note that the conda OpenROAD package was compiled with the GUI disabled, so in order to view the layout, you will need to install OpenROAD from source.

Below is the post-PnR layout for the TinyRocketConfig in Sky130 generated by OpenROAD.

../_images/vlsi-openroad-par-tinyrocketconfig.png

Intermediate databases are written in build/par-rundir between each step of the par action, These databases can be restored using the same open_chip script for debugging purposes.

cd build/chipyard.harness.TestHarness.TinyRocketConfig-ChipTop/par-rundir
./generated_scripts/open_chip -h
"
    Usage: ./generated-scripts/open_chip [-t] [openroad_db_name]

    Options
      openroad_db_name    : Name of database to load (default=latest)
      -t, --timing        : Load timing info (default=disabled because of slow load time)
      -h, --help          : Display this message
"
# load pre-global route database without timing information
./generated_scripts/open_chip pre_global_route

# load post-clock tree database with timing inforamtion
./generated_scripts/open_chip -t post_clock_tree

Various reports, including timing reports, are found in build/par-rundir/reports.

See the OpenROAD tool plugin for the full list of OpenROAD tool steps and their implementations.

5.9.5.3. DRC & LVS

As a note, this tutorial has been run extensively through commercial signoff tools, thus the open-source signoff flow is not stable or guaranteed to produce useful results. We welcome any contributions to improving our KLayout tool plugin, Magic tool plugin, and Netgen tool plugin.

We recommend KLayout for DRC to produce readable results, but Magic may be selected in example-openroad.yml by uncommenting the line vlsi.core.drc_tool: "hammer.drc.magic".

To run DRC & LVS and view the results:

make drc tutorial=sky130-openroad
./build/chipyard.harness.TestHarness.TinyRocketConfig-ChipTop/drc-rundir/generated-scripts/view_drc
make lvs tutorial=sky130-openroad
./build/chipyard.harness.TestHarness.TinyRocketConfig-ChipTop/lvs-rundir/generated-scripts/view_lvs

Note that in sky130-openroad.yml we have set the following YAML keys:

drc.magic.generate_only: true
lvs.netgen.generate_only: true

These keys cause the Hammer plugin to only generate all necessary scripts, without executing them with the respective tool. This is because Magic and Netgen, as of the writing of this tutorial, do not have a database format that may be loaded interactively, so to view the DRC/LVS results for debugging you must launch the tool interactively, then run DRC/LVS checks, which is done by the generated-scripts/view_[drc|lvs] scripts. This is not the case for KLayout, which does have a loadable database format.

Below is the window you should see when loading the KLayout DRC results interactively. Note that most of these DRC errors are from special rules relating to Sky130 SRAMs, which have been verified separately. In the future the KLayout tool plugin should blackbox these SRAM macros by default, but this feature does not exist yet.

../_images/vlsi-openroad-klayout-drc.png

5.9.5.4. VLSI Flow Control

First, refer to the VLSI Flow Control documentation. The below examples use the redo-par Make target to re-run only place-and-route. redo- may be prepended to any of the VLSI flow actions to re-run only that action.

# the following two commands run the entire flow, using the pre_extraction
#   database to save and reload a checkpoint of the design
make par HAMMER_EXTRA_ARGS="--stop_after_step extraction"
make redo-par HAMMER_EXTRA_ARGS="--start_before_step extraction"

# the following two commands are equivalent because the extraction
#   step immediately precedes the write_design step
make redo-par HAMMER_EXTRA_ARGS="--start_after_step extraction"
make redo-par HAMMER_EXTRA_ARGS="--start_before_step write_design"

# example of re-running only floorplanning to test out a new floorplan configuration
#   the "-p file.yml" causes file.yml to override any previous yaml/json configurations
make redo-par \
  HAMMER_EXTRA_ARGS="--only_step floorplan_design -p example-designs/sky130-openroad.yml"

5.9.6. Documentation

For more information about Hammer’s underlying implementation, visit the Hammer documentation website.

For details about the plugins used in this tutorial, check out the OpenROAD tool plugin repo + README and Sky130 tech plugin repo + README.