6.8. Incorporating Verilog Blocks

Working with existing Verilog IP is an integral part of many chip design flows. Fortunately, both Chisel and Chipyard provide extensive support for Verilog integration.

Here, we will examine the process of incorporating an MMIO peripheral that uses a Verilog implementation of Greatest Common Denominator (GCD) algorithm. There are a few steps to adding a Verilog peripheral:

  • Adding a Verilog resource file to the project
  • Defining a Chisel BlackBox representing the Verilog module
  • Instantiating the BlackBox and interfacing RegField entries
  • Setting up a chip Top and Config that use the peripheral

6.8.1. Adding a Verilog Blackbox Resource File

As before, it is possible to incorporate peripherals as part of your own generator project. However, Verilog resource files must go in a different directory from Chisel (Scala) sources.

generators/yourproject/
    build.sbt
    src/main/
        scala/
        resources/
            vsrc/
                YourFile.v

In addition to the steps outlined in the previous section on adding a project to the build.sbt at the top level, it is also necessary to add any projects that contain Verilog IP as dependencies to the tapeout project. This ensures that the Verilog sources are visible to the downstream FIRRTL passes that provide utilities for integrating Verilog files into the build process, which are part of the tapeout package in barstools/tapeout.

lazy val tapeout = conditionalDependsOn(project in file("./tools/barstools/tapeout/"))
  .dependsOn(chisel_testers, example, yourproject)
  .settings(commonSettings)

For this concrete GCD example, we will be using a GCDMMIOBlackBox Verilog module that is defined in the chipyard project. The Scala and Verilog sources follow the prescribed directory layout.

generators/chipyard/
    build.sbt
    src/main/
        scala/
            example/
                GCD.scala
        resources/
            vsrc/
                GCDMMIOBlackBox.v

6.8.2. Defining a Chisel BlackBox

A Chisel BlackBox module provides a way of instantiating a module defined by an external Verilog source. The definition of the blackbox includes several aspects that allow it to be translated to an instance of the Verilog module:

  • An io field: a bundle with fields corresponding to the portlist of the Verilog module.
  • A constructor parameter that takes a Map from Verilog parameter name to elaborated value
  • One or more resources added to indicate Verilog source dependencies

Of particular interest is the fact that parameterized Verilog modules can be passed the full space of possible parameter values. These values may depend on elaboration-time values in the Chisel generator, as the bitwidth of the GCD calculation does in this example.

Verilog GCD port list and parameters

module GCDMMIOBlackBox
  #(parameter WIDTH)
   (
    input                  clock,
    input                  reset,
    output                 input_ready,
    input                  input_valid,
    input [WIDTH-1:0]      x,
    input [WIDTH-1:0]      y,
    input                  output_ready,
    output                 output_valid,
    output reg [WIDTH-1:0] gcd,
    output                 busy
    );

Chisel BlackBox Definition

class GCDMMIOBlackBox(val w: Int) extends BlackBox(Map("WIDTH" -> IntParam(w))) with HasBlackBoxResource
  with HasGCDIO
{
  addResource("/vsrc/GCDMMIOBlackBox.v")
}

6.8.3. Instantiating the BlackBox and Defining MMIO

Next, we must instantiate the blackbox. In order to take advantage of diplomatic memory mapping on the system bus, we still have to integrate the peripheral at the Chisel level by mixing peripheral-specific traits into a TLRegisterRouter. The params member and HasRegMap base trait should look familiar from the previous memory-mapped GCD device example.

trait GCDModule extends HasRegMap {
  val io: GCDTopIO

  implicit val p: Parameters
  def params: GCDParams
  val clock: Clock
  val reset: Reset


  // How many clock cycles in a PWM cycle?
  val x = Reg(UInt(params.width.W))
  val y = Wire(new DecoupledIO(UInt(params.width.W)))
  val gcd = Wire(new DecoupledIO(UInt(params.width.W)))
  val status = Wire(UInt(2.W))

  val impl = if (params.useBlackBox) {
    Module(new GCDMMIOBlackBox(params.width))
  } else {
    Module(new GCDMMIOChiselModule(params.width))
  }

  impl.io.clock := clock
  impl.io.reset := reset.asBool

  impl.io.x := x
  impl.io.y := y.bits
  impl.io.input_valid := y.valid
  y.ready := impl.io.input_ready

  gcd.bits := impl.io.gcd
  gcd.valid := impl.io.output_valid
  impl.io.output_ready := gcd.ready

  status := Cat(impl.io.input_ready, impl.io.output_valid)
  io.gcd_busy := impl.io.busy

  regmap(
    0x00 -> Seq(
      RegField.r(2, status)), // a read-only register capturing current status
    0x04 -> Seq(
      RegField.w(params.width, x)), // a plain, write-only register
    0x08 -> Seq(
      RegField.w(params.width, y)), // write-only, y.valid is set on write
    0x0C -> Seq(
      RegField.r(params.width, gcd))) // read-only, gcd.ready is set on read
}

6.8.4. Defining a Chip with a BlackBox

Since we’ve parameterized the GCD instantiation to choose between the Chisel and the Verilog module, creating a config is easy.

class GCDAXI4BlackBoxRocketConfig extends Config(
  new chipyard.iobinders.WithUARTAdapter ++
  new chipyard.iobinders.WithTieOffInterrupts ++
  new chipyard.iobinders.WithBlackBoxSimMem ++
  new chipyard.iobinders.WithTiedOffDebug ++
  new chipyard.iobinders.WithSimSerial ++
  new testchipip.WithTSI ++
  new chipyard.config.WithUART ++
  new chipyard.config.WithNoGPIO ++
  new chipyard.config.WithBootROM ++
  new chipyard.config.WithL2TLBs(1024) ++
  new chipyard.example.WithGCD(useAXI4=true, useBlackBox=true) ++          // Use GCD blackboxed verilog, connect by AXI4->Tilelink
  new freechips.rocketchip.subsystem.WithNoMMIOPort ++
  new freechips.rocketchip.subsystem.WithNoSlavePort ++
  new freechips.rocketchip.subsystem.WithInclusiveCache ++
  new freechips.rocketchip.subsystem.WithNExtTopInterrupts(0) ++
  new freechips.rocketchip.subsystem.WithNBigCores(1) ++
  new freechips.rocketchip.system.BaseConfig)

You can play with the parameterization of the mixin to choose a TL/AXI4, BlackBox/Chisel version of the GCD.

6.8.5. Software Testing

The GCD module has a more complex interface, so polling is used to check the status of the device before each triggering read or write.

int main(void)
{
  uint32_t result, ref, x = 20, y = 15;

  // wait for peripheral to be ready
  while ((reg_read8(GCD_STATUS) & 0x2) == 0) ;

  reg_write32(GCD_X, x);
  reg_write32(GCD_Y, y);


  // wait for peripheral to complete
  while ((reg_read8(GCD_STATUS) & 0x1) == 0) ;

  result = reg_read32(GCD_GCD);
  ref = gcd_ref(x, y);

  if (result != ref) {
    printf("Hardware result %d does not match reference value %d\n", result, ref);
    return 1;
  }
  return 0;
}

6.8.6. Support for Verilog Within Chipyard Tool Flows

There are important differences in how Verilog blackboxes are treated by various flows within the Chipyard framework. Some flows within Chipyard rely on FIRRTL in order to provide robust, non-invasive transformations of source code. Since Verilog blackboxes remain blackboxes in FIRRTL, their ability to be processed by FIRRTL transforms is limited, and some advanced features of Chipyard may provide weaker support for blackboxes. Note that the remainder of the design (the “non-Verilog” part of the design) may still generally be transformed or augmented by any Chipyard FIRRTL transform.

  • Verilog blackboxes are fully supported for generating tapeout-ready RTL
  • HAMMER workflows offer robust support for integrating Verilog blackboxes
  • FireSim relies on FIRRTL transformations to generate a decoupled FPGA simulator. Therefore, support for Verilog blackboxes in FireSim is currently limited but rapidly evolving. Stay tuned!
  • Custom FIRRTL transformations and analyses may sometimes be able to handle blackbox Verilog, depending on the mechanism of the particular transform

As mentioned earlier in this section, BlackBox resource files must be integrated into the build process, so any project providing BlackBox resources must be made visible to the tapeout project in build.sbt